| 詳細參數 |
|---|
結構形式：模塊式
安裝方式：控制室安裝
LD指令處理器：硬PLC
輸出頻率：1.267GHz
處理速度：MPC7457處理器
程序容量：512MBDDR內存
數據容量：128MB閃存
加工定制：否
額定輸出功率：0.256千瓦
重量：0.36千克
電流：56 mA
防護等級：IP 40
分辨率：12 位
物料編碼：2347854878
可售賣地：全國
型號：MVME61006E-0163
EMERSON MVME61006E-0163
艾默生 MVME61006E-0163 1.267 GHz MPC7457 處理器，512MB DDR 內存，128MB 閃存，IEEE 處理 6E VMEbus 單板計算機.
無論是液體肥料、水、永久冷凝水或臟污，都不會對用于移動應用的ifm系統造成任何問題。外殼的特殊機械設計結合可靠的密封理念可防止水分的侵入。同時，合適的連接器和連接電纜還可確保外殼連接同樣具備IP 69K防護等級。
ifm控制組件的工作溫度范圍非常廣，可應用于所有氣候區域，即便是面對冰凍或酷熱的極端天氣條件。所有傳感器和控制器都必須在周期性的溫度沖擊試驗中證明其高抗沖擊性。高耐性的外殼材料則可確保鹽垢（可能由冬天的沙礫引起）不會對產品造成影響。當行駛變得困難時，材料會遭受反復振動和極端沖擊的影響。因此，這些用于移動應用的傳感器都采用全封裝設計。連接器通過專門的振動保護裝置防止意外松動�？刂破骱湍K的機械設計尤其適用于頻繁的沖擊和振動條件。
精密的電子設備經過專門的EMC測試，具有防電磁干擾的能力。傳導干擾也會被可靠濾除，不會對控制器造成影響。這可確保即使在面對運輸和物流等室外應用的惡劣條件時，仍能可靠通過CAN接口進行數據交換。Pagaard軟件工程師Michael Lindbjerg解釋道：“移動機械的電壓波動非常大。工業級PLC無法適應這種情況。相反，用于移動應用的PLC更適合此類應用，因?yàn)樗鼈兊墓ぷ麟妷悍秶浅４�，可達8-32V�！�
此外，所有ifm適用于移動機械的ecomat組件都通過了德國聯邦機動車運輸管理局的e1型式認證。這使得設備可安裝在車輛上，而不會導致其運營許可失效。除了e1型式認證要求的EMC限制外，所有設備的EMC抗干擾能力還達到了100 V/m，因此完全能夠承受車載電源系統的脈沖。
The PLC anti- interference is very and excellent, our root need not concern its service life and the work situation bad, these all problems have already no longer become the topic that we fail, but stay to our is a concern to come to internal resources of make use of the PLC to strengthen the control ability of the equipments for us, make our equipments more gentle. PLC language is not we imagine of edit collected materials the language or language of Cs to carry on weaving the distance, but the trapezoid diagram that the adoption is original after the electric appliances to control, make the electrical engineering teacher while weaving to write the procedure very easy comprehended the PLC language, and a lot of non- electricity professional also very quickly know and go deep into to the PLC.
Is PLC one of the advantage above and only, this is also one part that the people comprehend more and easily, in a lot of equipmentses, the people have already no longer hoped to see too many control buttons, they damage not only and easily and produce the artificial error easiest, small is not a main error perhaps you can still accept; But lead even is a fatal error greatly is what we can't is tolerant of. New technique always for bringing more safe and convenient operation for us, make we a lot of problems for face on sweep but light, do you understand the HMI? Says the HMI here you basically not b what it is, also have no interest understanding, change one inside text explains it into the touch to hold or man-machine interface you knew, it combines with the PLC to our larger space.
